(1) Handle the machine with care. When moving a compressor-cooled water dispenser, you should try to keep it upright. If you want to tilt it, it should not be tilted more than 45 degrees, and it should be stationary for a period of time after transportation. Work.
(2) When using the water dispenser for the first time, clean each container and pipe of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after the remaining water in the machine is drained. After adding a large bottle of water, open the hot water faucet. Only when water flows out can you plug in the power and turn on the heating switch to avoid dry burning and extend the life of the machine.
(3) If the water dispenser is not used for a long time, please turn off the machine switch and unplug the power plug, then unscrew the drain valve, drain out the remaining water in the machine, and then tighten the drain valve (please be careful of hot water burns during the draining process).
(4) It is best to disconnect the power supply when not in use at night, which can save energy and ensure safety when no one is using it.
(5) During the use of the machine, it is recommended to clean and disinfect it once every three months according to the specific situation. After one year of use, professional maintenance personnel can be asked to clean the smart seat and inner tank.
(6) The water dispenser should be placed in a ventilated place to prevent moisture, direct sunlight, and away from heating. The water dispenser should be about 15 centimeters away from the wall and should not be placed near valuable furniture and other household appliances to avoid splashing water and damaging the items. The water dispenser must be placed stably to prevent the machine from making noise.
(7) It is prohibited to use organic solvents such as gasoline to clean the surface of the machine.
(8) If the power cord is found to be damaged, the water dispenser must be replaced with a special soft cord or contact the dealer. The machine must use a socket with a grounding device and a leakage protector to prevent the enclosure from becoming electrified.
(9) Children should not play near the water dispenser. If necessary, replace the hot water faucet with a safety faucet to prevent scalding children.
(10) Do not insert metal rods into the back panel ventilation window to avoid damaging the fan or causing electric shock; do not cover the fan ventilation window to avoid damage to the semiconductor refrigeration components due to poor air exhaust and poor heat dissipation, causing adverse conditions.
(11) For water dispensers that use compressor refrigeration, when the refrigeration power supply is disconnected, it must wait 3-5 minutes before starting again to extend the life of the machine.
(12) When pressing the faucet to collect water, do not use too much force to avoid the rotating part of the pressing hand coming out or being damaged.